SNlM0e value not found. Double-check __Secure-1PSID value or pass it as token='xxxxx'.

[hyuk-june]

잘쓰고 있었는데 어느 순간부터 아래와 같은 에러가 발생합니다.
쿠키값을 다시 가져와 세팅해도 여전히 작동하지 않네요.
확인 좀 해주실 수 있으신가요?
감사합니다.

SNlM0e value not found. Double-check __Secure-1PSID value or pass it as token='xxxxx'.

[dsdanielpark]

안녕하세요. 지금 기능은 다시 체크해보았는데, 문제 없이 작동하는 것을 확인했습니다.
API rate limiting이 걸리셨거나 일시적인 계정 제한일 수 있을 것 같습니다. 다른 계정의 쿠키 값으로 시도해보시거나 코랩에서 기능을 체크해보시길 권해드립니다. 다른 유저들에 따르면, 대부분 몇시간 뒤에 다시 정상작동하였다고 합니다. 감사합니다.

[hyuk-june]

아! 완전 로그아웃 하고 다시 쿠키 설정하니까 잘 되네요.
유용하게 잘 쓰고 있습니다.
좋은 자료 만들어 주셔서 정말 감사합니다.

[GvdDool]

Dear @dsdanielpark ,
First of all - congratulations on writing a well-working reverse-engineered API.

I have no problem with the code, that's why I am tagging onto this discussion and not creating an issue, and the comment you made about "rate limiting is stuck, or it may be a temporary account limit." seems very relevant to my case.

To give some context:
I have written a small program to test the functionality when trying to scale up and get a feel for the accuracy of the program. The central question I am asking is:
'''Bard, can you give me all the countries in the sub-region: {sub_region}, as defined by the UN, in the format: "sub-region", "country name", and can you please make the list readable in Python code as a dictionary, with the name: sub_regions?'''

This question works fine, but as there are 21 sub-regions (this was part of the test), the program fails randomly after 15 iterations, rarely making it to the end. I am on Windows, and I run this code on a Chrome browser in a CoLab environment while the cookie is obtained from a private window in the FireFox browser (to make refreshing the cookies easier).

Again, the API is working well, and I get answers in the "correct" format, but on the tab in the FireFox browser, it often reads that the system has detected an unusual amount of traffic, and Google is asking to verify that I am not a bot. What kind of strategies are available to avoid being blocked in the loop, the cookie stays "fresh", and relaunching the loop sometimes runs again up to 15 requests, but when done too quickly after being blocked, the code will not work, so I am suspecting a "temporary account limit".

[dsdanielpark]

Dear GvdDool,

It is highly likely that there are restrictions imposed on the account and IP. While sending "sub-region" and "country name" as a dictionary can indeed be a relatively quick task, I am doubtful whether this alone can successfully bypass the restrictions. Unless using a proxy, merely specifying these in the request might not be sufficient to circumvent the limitations. If you happen to test and find that it works, please let me know, and I will add it accordingly.

[GvdDool]

Thanks, I was already wondering what the "cookie values(snim0e value)" is doing, not an expert in API design and web development, but yes, that was my next idea: "forcefully reset the cookie values". This is not easy because the "browser_cookie3" is not picking up the __Secure-1PSID values (for me), as these are temporary values and don't make it to the SQLite db (as far as I know), so running "browser_cookie3" gives me only the permanent cookies, which makes picking up the __Secure-1PSID a little bit more challenging.

I looked into running under selenium, but this is then blocked by the 2-way verification on the Google account to login to Bard; I was hoping to get the __Secure-1PSID when selenium was active by using: https://www.selenium.dev/documentation/webdriver/interactions/cookies/#get-all-cookies

[GvdDool]

@dsdanielpark , sorry for bugging you, but is the current class able to run in a "with block"? I am getting the following error:

[GvdDool]

But I think I will have to try something else:
I have implemented a wait time, average 3.8 seconds to stay within the 1000 requests an hour, and still get:
Exception: Response status code is not 200. Response Status is 429

The HTTP 429 Too Many Requests response status code indicates the user has sent too many requests in a given amount of time ("rate limiting"). A Retry-After header might be included to this response indicating how long to wait before making a new request.

[GvdDool]

I was testing and hit the 20-minute "freshness" limit before I could get confirmation that there is a data limit (~7000) words, I managed two full runs (getting 7150 words in total) when the code broke with the error SNlM0e value not found. Double-check __Secure-1PSID value or pass it as token='xxxxx'.) Resetting the __Secure-1PSID, and rerunning gave me the HTTP 429 error in the second pass, with 75 successful requests; the total amount of words retrieved was 11050 in two sessions.

[GvdDool]

This said, the tool is very useful, but it is outside my skillset to make it scalable, which is a pity.