Tasmota script: how put a counter value to variable ?

[Korthy2]

GPIO5 have D0 Signal.
Counter1 count

I will the Counter put in a Variable.
But the Variable is erver 0

My Script:

">D"
"a=0"
">B"
"a=Counter1"
">W"
"

a = %a%
"

Script End

UI Ausgabe:
Counter1 = 4554
a = 0

An idea?

[sfromis]

Not using scripting, but based on examples, I'd expect this to capture a counter value at TelePeriod, not at boot time:

>T
a=Counter#C1

[pkkrusty]

a=pc[1]

From scripting page: pc[x] = pulse counter value (x = 1..4)

[Korthy2]

thank you very much, that works!

[cristidobrescu]

Hi @Korthy2 would you be kind and post the correc script code? As I didn`t get it what @pkkrusty said about it to modify

[Korthy2]

Here my script, after >B (currentd1=pc[1] )

D

h1=0 g:currentd1=0

B

currentd1=pc[1] ; hours if (hours>h1 or hours==0) and mins==0 then h1=hours currenth1=total/1000 endif currenth=total/1000-currenth1 Best Regards Andreas Korth Konrad-Hofmann-Str. 5 76872 Hergersweiler Von: cristid ***@***.***> Gesendet: Sonntag, 12. Mai 2024 10:35 An: arendst/Tasmota ***@***.***> Cc: Korthy2 ***@***.***>; Mention ***@***.***> Betreff: Re: [arendst/Tasmota] Tasmota script: how put a counter value to variable ? (Discussion #15979) Hi @Korthy2 <https://github.com/Korthy2> would you be kind and post the correc script code? As I didn`t get it what @pkkrusty <https://github.com/pkkrusty> said about it to modify — Reply to this email directly, view it on GitHub <#15979 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AZ725VUOYQ6QV2Y4TNXEMZLZB4SUTAVCNFSM53S7IRWKU5DIOJSWCZC7NNSXTOKENFZWG5LTONUW63SDN5WW2ZLOOQ5TSNBQGM3DOMY> . You are receiving this because you were mentioned. <https://github.com/notifications/beacon/AZ725VU6XUNNHOFY4CHT7MLZB4SUTA5CNFSM53S7IRWKYY3PNVWWK3TUL52HS4DFWFCGS43DOVZXG2LPNZBW63LNMVXHJKTDN5WW2ZLOORPWSZGOACHX2GI.gif> Message ID: ***@***.*** ***@***.***> >

[cristidobrescu]

You mean, this is the whole code? :
`>D

h1=0

g:currentd1=0

B
(currentd1=pc[1])

; hours

if (hours>h1 or hours==0) and mins==0

then

h1=hours

currenth1=total/1000

endif

currenth=total/1000-currenth1`

....cause it seem it doesn`t show anything

[Korthy2]

This is the Code for tasmota Skript.First define a variable :g:currentd1=0Now you can put the counter PC[1] Content put in the variable:currentd1=pc[1]BRAndreas -------- Ursprüngliche Nachricht --------Von: cristid ***@***.***> Datum: 14.05.24 19:18 (GMT+01:00) An: arendst/Tasmota ***@***.***> Cc: Korthy2 ***@***.***>, Mention ***@***.***> Betreff: Re: [arendst/Tasmota] Tasmota script: how put a counter value to variable ? (Discussion #15979) You mean, this is the whole code? : D h1=0 g:currentd1=0 B (currentd1=pc[1]) ; hours if (hours>h1 or hours==0) and mins==0 then h1=hours currenth1=total/1000 endif currenth=total/1000-currenth1 ....cause it seem it doesn`t show anything —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you were mentioned.Message ID: ***@***.***>