Can't switch power outlets after update to tasmota 13.4.0.4 (and 13.4.1.1) #21382

MyUniversalDeveloper · 2024-04-15T12:59:11Z

MyUniversalDeveloper
Apr 15, 2024

PROBLEM DESCRIPTION

Can't switch power outlets after update to tasmota 13.4.0.4 (and 13.4.1.1)

REQUESTED INFORMATION

Make sure your have performed every step and checked the applicable boxes before submitting your issue. Thank you!

  Configuration output here:
14:34:30.840 RSL: RESULT = {"NAME":"Gosund_P1","GPIO":[0,3072,544,3104,0,259,0,0,225,226,224,0,32,4704],"FLAG":0,"BASE":18}
14:34:31.077 RSL: RESULT = {"Module":{"0":"Gosund_P1"}}
14:34:31.293 RSL: RESULT = {"GPIO0":{"0":"None"},"GPIO1":{"3072":"CSE7766 Tx"},"GPIO2":{"544":"LedLink"},"GPIO3":{"3104":"CSE7766 Rx"},"GPIO4":{"0":"None"},"GPIO5":{"259":"Relay_i4"},"GPIO9":{"0":"None"},"GPIO10":{"0":"None"},"GPIO12":{"225":"Relay2"},"GPIO13":{"226":"Relay3"},"GPIO14":{"224":"Relay1"},"GPIO15":{"0":"None"},"GPIO16":{"32":"Button1"},"GPIO17":{"4704":"ADC Input"}}

If using rules, provide the output of this command: Backlog Rule1; Rule2; Rule3:

  Rules output here:
14:35:15.571 RSL: RESULT = {"Rule1":{"State":"ON","Once":"OFF","StopOnError":"OFF","Length":34,"Free":477,"Rules":"ON Button1#State DO Power4 2 ENDON"}}
14:35:15.806 RSL: RESULT = {"Rule2":{"State":"ON","Once":"ON","StopOnError":"OFF","Length":116,"Free":395,"Rules":"ON Analog#A0div10<30 DO Power3 2 BREAK ON Analog#A0div10<60 DO Power2 2 BREAK ON Analog#A0div10<80 DO Power1 2 ENDON"}}
14:35:16.015 RSL: RESULT = {"Rule3":{"State":"OFF","Once":"OFF","StopOnError":"OFF","Length":0,"Free":511,"Rules":""}}

Provide the output of this command: Status 0:

  STATUS 0 output here:
14:35:50.141 RSL: STATUS = {"Status":{"Module":0,"DeviceName":"Mehrfachsteckdose","FriendlyName":["Steckdose 1","Steckdose 2","Steckdose 3","USB"],"Topic":"mdosexxxx","ButtonTopic":"0","Power":"1000","PowerLock":"0000","PowerOnState":3,"LedState":1,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0,"InfoRetain":0,"StateRetain":0,"StatusRetain":0}}
14:35:50.159 RSL: STATUS1 = {"StatusPRM":{"Baudrate":4800,"SerialConfig":"8E1","GroupTopic":"tasmotas","OtaUrl":"http://ota.tasmota.com/tasmota/tasmota.bin.gz","RestartReason":"Exception","Uptime":"0T00:25:25","StartupUTC":"2024-04-15T12:10:25","Sleep":50,"CfgHolder":4617,"BootCount":451,"BCResetTime":"2020-07-10T11:53:11","SaveCount":2265,"SaveAddress":"F5000"}}
14:35:50.173 RSL: STATUS2 = {"StatusFWR":{"Version":"13.4.1.1(d957c97-tasmota)","BuildDateTime":"2024-04-15T10:31:40","Boot":31,"Core":"2_7_6","SDK":"2.2.2-dev(38a443e)","CpuFrequency":80,"Hardware":"ESP8285N08","CR":"403/699"}}
14:35:50.187 RSL: STATUS3 = {"StatusLOG":{"SerialLog":0,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["StFld5",""],"TelePeriod":300,"Resolution":"558180C0","SetOption":["00008001","2805C80001000680003C5A0A002800000000","000000C0","00006000","00004000","00000000"]}}
14:35:50.211 RSL: STATUS4 = {"StatusMEM":{"ProgramSize":647,"Free":356,"Heap":25,"ProgramFlashSize":1024,"FlashSize":1024,"FlashChipId":"144051","FlashFrequency":40,"FlashMode":"DOUT","Features":["0809","8F9AC787","04368001","000000CF","010013C0","C000F981","00004004","00001000","54000020","00000080","00000000"],"Drivers":"1,!2,3,!4,!5,!6,!7,!8,9,10,!12,!16,!18,!19,!20,!21,!22,!24,26,!27,29,!30,!35,!37,!45,62,!68","Sensors":"1,2,3,4,5,6","I2CDriver":"7"}}
14:35:50.228 RSL: STATUS5 = {"StatusNET":{"Hostname":"mdosexxx","IPAddress":"192.168.xxx.x","Gateway":"192.168.xxx.x","Subnetmask":"255.255.255.0","DNSServer1":"192.168.xxx.x","DNSServer2":"0.0.0.0","Mac":"xxxx","Webserver":2,"HTTP_API":1,"WifiConfig":2,"WifiPower":17.0}}
14:35:50.244 RSL: STATUS7 = {"StatusTIM":{"UTC":"2024-04-15T12:35:50Z","Local":"2024-04-15T14:35:50","StartDST":"2024-03-31T02:00:00","EndDST":"2024-10-27T03:00:00","Timezone":99,"Sunrise":"06:34","Sunset":"20:28"}}
14:35:50.258 RSL: STATUS9 = {"StatusPTH":{"PowerDelta":[0,0,0],"PowerLow":0,"PowerHigh":0,"VoltageLow":0,"VoltageHigh":0,"CurrentLow":0,"CurrentHigh":0}}
14:35:50.319 RSL: STATUS10 = {"StatusSNS":{"Time":"2024-04-15T14:35:50","ANALOG":{"A0":1024},"ENERGY":{"TotalStartTime":"2020-07-10T11:45:37","Total":34.856,"Yesterday":0.073,"Today":0.043,"Power":3,"ApparentPower":16,"ReactivePower":16,"Factor":0.18,"Voltage":230,"Current":0.070}}}
14:35:50.336 RSL: STATUS11 = {"StatusSTS":{"Time":"2024-04-15T14:35:50","Uptime":"0T00:25:25","UptimeSec":1525,"Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"POWER1":"OFF","POWER2":"OFF","POWER3":"OFF","POWER4":"ON","Wifi":{"AP":1,"SSId":"StFld5","BSSId":"04:B4:FE:D6:31:08","Channel":1,"Mode":"11n","RSSI":64,"Signal":-68,"LinkCount":1,"Downtime":"0T00:00:15"}}}
14:35:50.359 RSL: STATUS12 = {"StatusSTK":{"Exception":28,"Reason":"Exception","EPC":["40235150","00000000","00000000"],"EXCVADDR":"00000079","DEPC":"00000000","CallChain":["40235cba","40258594","40256d08","402394a5","40227322","40252329","4025188c","40221c40","40296706","4025186c","40296706","40221c40","40221c40","402399a8","402529b4","40253d5e","40246b4a","40247119","40251e7c","40221c40","402558a2","40255900","401000e1","40221c78","40251925","40228e7e","401012c2","40228f97","40256b10","4024a121","4021c0a3"]}}

Set weblog to 4 and then, when you experience your issue, provide the output of the Console log:

  Console output here:
00:00:05.895 WIF: Checking connection...
00:00:05.898 WIF: Connected
00:00:05.938 DMP: 55 5A 02 D8 20 00 07 AC 00 3D 6D 03 77 1F 4E C7 F8 25 8A 50 E1 C2 69 08
00:00:05.964 DMP: 55 5A 02 D8 20 00 07 AC 00 3D 6D 03 77 1F 4E C7 F8 27 22 B6 E1 C2 69 08
00:00:06.019 WIF: Sending Gratuitous ARP
00:00:06.022 NTP: Sync time...
00:00:06.024 WIF: DNS resolved '192.168.xxx.x' (192.168.177.1) in 1 ms
00:00:06.038 RTC: UTC 2024-04-15T12:45:10Z, DST 2024-03-31T02:00:00, STD 2024-10-27T03:00:00
14:45:10.000 RTC: Synced by NTP
14:45:10.022 DMP: 55 5A 02 D8 20 00 07 AC 00 3D 6D 03 77 1F 4E C7 F8 28 BC 1B E1 C2 69 08
14:45:10.074 HTP: Web server active on mdosexxx with IP address 192.168.xxx.x
14:45:10.079 RSL: INFO1 = {"Info1":{"Module":"Gosund_P1","Version":"13.4.1.1(d957c97-tasmota)","FallbackTopic":"cmnd/DVES_C67027_fb/","GroupTopic":"cmnd/tasmotas/"}}
14:45:10.092 RSL: INFO2 = {"Info2":{"WebServerMode":"Admin","Hostname":"mdosexxx","IPAddress":"192.168.xxx.x"}}
14:45:10.113 RSL: INFO3 = {"Info3":{"RestartReason":{"Exception":28,"Reason":"Exception","EPC":["40235150","00000000","00000000"],"EXCVADDR":"00000079","DEPC":"00000000","CallChain":["40235cba","40258594","40256d08","402394a5","40227322","40252329","4025188c","40221c40","40296706","4025186c","40296706","40221c40","40221c40","402399a8","402529b4","40253d5e","40246b4a","40247119","40251e7c","40221c40","402558a2","40255900","401000e1","40221c78","40251925","40228e7e","401012c2","40228f97","40256b10","4021f88c","402314d4"]},"BootCount":453}}
14:45:10.129 RSL: RESULT = {"POWER1":"OFF"}
14:45:10.131 RSL: POWER1 = OFF
14:45:10.134 RSL: RESULT = {"POWER2":"OFF"}
14:45:10.136 RSL: POWER2 = OFF
14:45:10.138 RSL: RESULT = {"POWER3":"OFF"}
14:45:10.140 RSL: POWER3 = OFF
14:45:10.143 RSL: RESULT = {"POWER4":"ON"}
14:45:10.145 RSL: POWER4 = ON
14:45:10.187 DMP: 55 5A 02 D8 20 00 07 AC 00 3D 6D 03 77 1F 4E C7 F8 2A 56 7F E1 C2 69 08
14:45:10.232 DMP: 55 5A 02 D8 20 00 07 AC 00 3D 6D 03 77 1F 4E C7 F8 2B EF E4 E1 C2 69 07
14:45:10.349 DMP: 55 5A 02 D8 20 00 07 AC 00 3D 6D 03 77 1F 4E C7 F8 2D 88 4A E1 C2 69 08
14:45:10.456 DMP: 55 5A 02 D8 20 00 07 AC 00 3D 6D 03 77 1F 4E C7 F8 2F 21 AF E1 C2 69 08
14:45:10.548 DMP: 55 5A 02 D8 20 00 07 AC 00 3D 6D 03 FD DF 4E C7 F8 30 BB 14 E1 C2 69 4E
14:45:10.653 DMP: 55 5A 02 D8 20 00 07 AC 00 3D 6D 03 FD DF 4E C7 F8 32 55 78 E1 C2 69 4E
14:45:10.757 DMP: 55 5A 02 D8 20 00 07 AC 00 3D 6D 03 FD DF 4E C7 F8 33 ED DE E1 C2 69 4D
14:45:10.863 DMP: 55 5A 02 D8 20 00 07 AC 00 3D 6D 03 FD DF 4E C7 F8 35 87 43 E1 C2 69 4E
14:45:11.009 DMP: 55 5A 02 D8 20 00 07 AC 00 3D 6D 03 FD DF 4E C7 F8 37 21 A7 E1 C2 69 4E
14:45:11.216 QPC: Reset
14:45:11.222 DMP: 55 5A 02 D8 20 00 07 AC 00 3D 6D 03 FD DF 4E C7 F8 38 BB 0C E1 C2 69 4E
14:45:11.240 DMP: 55 5A 02 D8 20 00 07 AC 00 3D 6D 03 FD DF 4E C7 F8 3A 53 72 E1 C2 69 4E
14:45:11.323 DMP: 55 5A 02 D8 20 00 07 AC 00 3D 6D 03 FD DF 4E C7 F8 3B EC D7 E1 C2 69 4D
14:45:11.429 DMP: 55 5A 02 D8 20 00 07 B1 00 3D 6D 03 FD DF 4E C7 F8 3D 87 3B E1 C2 69 53

TO REPRODUCE

Steps to reproduce the behavior:
Like described above.

EXPECTED BEHAVIOUR

A clear and concise description of what you expected to happen.
Correct switching of the power outlets.

SCREENSHOTS

If applicable, add screenshots to help explain your problem.

ADDITIONAL CONTEXT

Add any other context about the problem here.

(Please, remember to close the issue when the problem has been addressed)

arendst · 2024-04-15T13:35:40Z

arendst
Apr 15, 2024
Maintainer

I fear your internal power supply reaches EOL. We see more devices having issues with later Tasmota versions.

I've tested latest dev release on a Sonoff 4channel relay box and it still works fine there.

So stay below 13.4.0.4 as long as it works.

0 replies

arendst · 2024-04-15T13:49:40Z

arendst
Apr 15, 2024
Maintainer

For testing purposes you might want to try disabling the analog input and see if the relays are operational from the web GUI.

To disable analog input do change GPIO17 from ADC Input to None in menu option Configure Template. ALso disable the rule with command rule2 0.

0 replies

MyUniversalDeveloper · 2024-04-16T08:37:16Z

MyUniversalDeveloper
Apr 16, 2024
Author

Hi, thank You for your quick response! I've changed the settings but there was no benefit. The rollback to 13.4.0 works well. Is it possible to get minor versions like 13.4.0.2 or 13.4.0.3?

0 replies

Jason2866 · 2024-04-16T11:12:03Z

Jason2866
Apr 16, 2024
Collaborator

You find any version here. It is based on day and commit SHA
https://github.com/tasmota/install/releases

0 replies

arendst · 2024-04-17T10:01:59Z

arendst
Apr 17, 2024
Maintainer

Would be great if you can pinpoint the exact version where it fails.

0 replies

akerrichardt · 2024-04-17T11:57:08Z

akerrichardt
Apr 17, 2024

Shelly 1, same problem here, no manual control with physical switch. Everything works when reverted back to 13.4.0.

0 replies

arendst · 2024-04-17T14:24:34Z

arendst
Apr 17, 2024
Maintainer

Verified toggle switch connected to Shelly 1PM broken with latest versions.

Investigating....

0 replies

arendst · 2024-04-17T15:31:22Z

arendst
Apr 17, 2024
Maintainer

Try latest dev branch. At least the Shelly 1 should work fine now. Not sure about the initial device.

1 reply

akerrichardt May 11, 2024

Since I upgraded my Shelley 1 to 13.1.4.2 I am not able turn on the light using MQTT with my Home assistant Raspberry PI. I am able to turn the switch on and off logging into the Shelley with the browser using the IP address.

MyUniversalDeveloper · 2024-04-20T10:25:47Z

MyUniversalDeveloper
Apr 20, 2024
Author

@arendst With version 13.4.0.4 the failure arrrives. @Jason2866 Thank You for your hint.

0 replies

Jason2866 · 2024-04-20T12:39:28Z

Jason2866
Apr 20, 2024
Collaborator

@MyUniversalDeveloper Please try latest development version. It should be fixed.

0 replies

Jason2866 · 2024-04-28T19:04:09Z

Jason2866
Apr 28, 2024
Collaborator

Closing since no feedback.

0 replies

MyUniversalDeveloper · 2024-05-07T10:18:47Z

MyUniversalDeveloper
May 7, 2024
Author

Sorry for my late feedback. I've tried today the newest (13.4.1.2) firmware with the same failure as before. In my opinion this bug should be reopened (if this is possible).

0 replies

arendst · 2024-05-07T14:46:01Z

arendst
May 7, 2024
Maintainer

Pls provide more logging while pressing the individual switches. Set logging to 4 and press the switches after some seconds. There should be something like

16:32:59.667-022 RUL: ANALOG#A0DIV10<30 performs 'Power3 2'
16:32:59.670-022 SRC: Rule
16:32:59.671-022 CMD: Grp 0, Cmd 'POWER', Idx 3, Len 1, Pld 2, Data '2'
16:32:59.676-019 MQT: stat/wemos14/RESULT = {"POWER3":"ON"}
16:32:59.681-020 MQT: stat/wemos14/POWER3 = ON
16:33:00.546-022 CFG: Saved to flash at FA, Count 35, Bytes 4096
16:33:05.156-022 RUL: ANALOG#A0DIV10<30 performs 'Power3 2'
16:33:05.159-022 SRC: Rule
16:33:05.161-022 CMD: Grp 0, Cmd 'POWER', Idx 3, Len 1, Pld 2, Data '2'
16:33:05.168-019 MQT: stat/wemos14/RESULT = {"POWER3":"OFF"}
16:33:05.176-020 MQT: stat/wemos14/POWER3 = OFF
16:33:05.543-022 CFG: Saved to flash at F9, Count 36, Bytes 4096

And pls verify if the main button still works.

EDIT: You might also want to log the different analog values from the three socket buttons. To do so perform command teleperiod 10 and set logging to 3. Then hold a button for over ten seconds to report it's analog value. Release the button and press another button.

0 replies

mediarath · 2024-05-07T18:16:25Z

mediarath
May 7, 2024

I have just flashed a P1 with 13.4.1.2. Same template and same rule and cannot reproduce the error. My P1 is fine. At least with 13.4.1.2

0 replies

Jason2866 · 2024-05-07T18:52:25Z

Jason2866
May 7, 2024
Collaborator

@mediarath Thx for testing. So the issue is specific to this one device.

0 replies

Jason2866 · 2024-05-07T18:55:00Z

Jason2866
May 7, 2024
Collaborator

Moving to discussions, since not a Tasmota issue

0 replies

akerrichardt · 2024-05-11T19:15:03Z

akerrichardt
May 11, 2024

Since I upgraded my Shelley 1 to 13.1.4.2 I am not able turn on the light using MQTT with my Home assistant Raspberry PI. I am able to turn the switch on and off logging into the Shelley with the browser using the IP address.

3 replies

sfromis May 11, 2024

You are off-topic in a thread which is about a specific device, working very differently from yours.

akerrichardt May 11, 2024

So where do I put THIS!!

barbudor May 12, 2024

Don't shout and start a new discussion
And provide information including
From which version you upgraded
Your configuration
Tasmota logs with level 3 on boot and when trying to turn power on/off from HA

MyUniversalDeveloper · 2024-05-21T09:52:37Z

MyUniversalDeveloper
May 21, 2024
Author

I've made an update to 14.0.0.1 and done a reset. After this I#ve made a new configuration. The behavior is the same. I try to make the logging while pressing the individual switches as soon as possible.

0 replies

MyUniversalDeveloper · 2024-05-23T13:38:24Z

MyUniversalDeveloper
May 23, 2024
Author

Hi,
thank you for your support. I've set logging 4 with only this result:

14:27:43.060 CMD: SysLog
14:27:43.069 RSL: RESULT = {"SysLog":{"4":{"Active":"4"}}}
14:27:50.362 RSL: RESULT = {"POWER4":"OFF"}

I've tried all buttons. In my opinion it seems that only button 4 is recognized.
Setting teleperiod and pressing buttons results in:

14:28:43.872 CMD: teleperiod 10
14:28:43.880 RSL: RESULT = {"TelePeriod":10}
14:28:44.200 RSL: STATE = {"Time":"2024-05-23T14:28:44","Uptime":"0T00:11:45","UptimeSec":705,"Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"POWER1":"OFF","POWER2":"OFF","POWER3":"OFF","POWER4":"OFF","Wifi":{"AP":1,"SSId":"StFld5","BSSId":"48:5D:35:41:11:2E","Channel":7,"Mode":"11n","RSSI":84,"Signal":-58,"LinkCount":1,"Downtime":"0T00:00:07"}}
14:28:44.248 RSL: SENSOR = {"Time":"2024-05-23T14:28:44","ANALOG":{"A0":1024},"ENERGY":{"TotalStartTime":"2024-05-21T10:24:59","Total":0.002,"Yesterday":0.000,"Today":0.001,"Period":1,"Power":0,"ApparentPower":0,"ReactivePower":0,"Factor":0.00,"Voltage":0,"Current":0.000}}
14:28:54.198 RSL: STATE = {"Time":"2024-05-23T14:28:54","Uptime":"0T00:11:55","UptimeSec":715,"Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"POWER1":"OFF","POWER2":"OFF","POWER3":"OFF","POWER4":"OFF","Wifi":{"AP":1,"SSId":"StFld5","BSSId":"48:5D:35:41:11:2E","Channel":7,"Mode":"11n","RSSI":86,"Signal":-57,"LinkCount":1,"Downtime":"0T00:00:07"}}
14:28:54.244 RSL: SENSOR = {"Time":"2024-05-23T14:28:54","ANALOG":{"A0":1024},"ENERGY":{"TotalStartTime":"2024-05-21T10:24:59","Total":0.002,"Yesterday":0.000,"Today":0.001,"Period":0,"Power":0,"ApparentPower":0,"ReactivePower":0,"Factor":0.00,"Voltage":0,"Current":0.000}}
14:29:04.209 RSL: STATE = {"Time":"2024-05-23T14:29:04","Uptime":"0T00:12:05","UptimeSec":725,"Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"POWER1":"OFF","POWER2":"OFF","POWER3":"OFF","POWER4":"OFF","Wifi":{"AP":1,"SSId":"StFld5","BSSId":"48:5D:35:41:11:2E","Channel":7,"Mode":"11n","RSSI":80,"Signal":-60,"LinkCount":1,"Downtime":"0T00:00:07"}}
14:29:04.255 RSL: SENSOR = {"Time":"2024-05-23T14:29:04","ANALOG":{"A0":1024},"ENERGY":{"TotalStartTime":"2024-05-21T10:24:59","Total":0.002,"Yesterday":0.000,"Today":0.001,"Period":0,"Power":0,"ApparentPower":0,"ReactivePower":0,"Factor":0.00,"Voltage":0,"Current":0.000}}
14:29:08.071 CMD: Syslog 3
14:29:08.078 RSL: RESULT = {"SysLog":{"3":{"Active":"3"}}}
14:29:14.225 RSL: STATE = {"Time":"2024-05-23T14:29:14","Uptime":"0T00:12:15","UptimeSec":735,"Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"POWER1":"OFF","POWER2":"OFF","POWER3":"OFF","POWER4":"OFF","Wifi":{"AP":1,"SSId":"StFld5","BSSId":"48:5D:35:41:11:2E","Channel":7,"Mode":"11n","RSSI":84,"Signal":-58,"LinkCount":1,"Downtime":"0T00:00:07"}}
14:29:14.267 RSL: SENSOR = {"Time":"2024-05-23T14:29:14","ANALOG":{"A0":1024},"ENERGY":{"TotalStartTime":"2024-05-21T10:24:59","Total":0.002,"Yesterday":0.000,"Today":0.001,"Period":0,"Power":0,"ApparentPower":0,"ReactivePower":0,"Factor":0.00,"Voltage":0,"Current":0.000}}
14:29:24.238 RSL: STATE = {"Time":"2024-05-23T14:29:24","Uptime":"0T00:12:25","UptimeSec":745,"Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"POWER1":"OFF","POWER2":"OFF","POWER3":"OFF","POWER4":"OFF","Wifi":{"AP":1,"SSId":"StFld5","BSSId":"48:5D:35:41:11:2E","Channel":7,"Mode":"11n","RSSI":74,"Signal":-63,"LinkCount":1,"Downtime":"0T00:00:07"}}
14:29:24.281 RSL: SENSOR = {"Time":"2024-05-23T14:29:24","ANALOG":{"A0":753},"ENERGY":{"TotalStartTime":"2024-05-21T10:24:59","Total":0.002,"Yesterday":0.000,"Today":0.001,"Period":0,"Power":0,"ApparentPower":0,"ReactivePower":0,"Factor":0.00,"Voltage":0,"Current":0.000}}
14:29:34.199 RSL: STATE = {"Time":"2024-05-23T14:29:34","Uptime":"0T00:12:35","UptimeSec":755,"Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"POWER1":"OFF","POWER2":"OFF","POWER3":"OFF","POWER4":"OFF","Wifi":{"AP":1,"SSId":"StFld5","BSSId":"48:5D:35:41:11:2E","Channel":7,"Mode":"11n","RSSI":84,"Signal":-58,"LinkCount":1,"Downtime":"0T00:00:07"}}
14:29:34.248 RSL: SENSOR = {"Time":"2024-05-23T14:29:34","ANALOG":{"A0":476},"ENERGY":{"TotalStartTime":"2024-05-21T10:24:59","Total":0.002,"Yesterday":0.000,"Today":0.001,"Period":0,"Power":0,"ApparentPower":0,"ReactivePower":0,"Factor":0.00,"Voltage":0,"Current":0.000}}
14:29:44.198 RSL: STATE = {"Time":"2024-05-23T14:29:44","Uptime":"0T00:12:45","UptimeSec":765,"Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"POWER1":"OFF","POWER2":"OFF","POWER3":"OFF","POWER4":"OFF","Wifi":{"AP":1,"SSId":"StFld5","BSSId":"48:5D:35:41:11:2E","Channel":7,"Mode":"11n","RSSI":78,"Signal":-61,"LinkCount":1,"Downtime":"0T00:00:07"}}
14:29:44.242 RSL: SENSOR = {"Time":"2024-05-23T14:29:44","ANALOG":{"A0":1024},"ENERGY":{"TotalStartTime":"2024-05-21T10:24:59","Total":0.002,"Yesterday":0.000,"Today":0.001,"Period":0,"Power":0,"ApparentPower":0,"ReactivePower":0,"Factor":0.00,"Voltage":0,"Current":0.000}}
14:29:49.898 RSL: RESULT = {"POWER4":"ON"}
14:29:49.900 RSL: POWER4 = ON
14:29:54.198 RSL: STATE = {"Time":"2024-05-23T14:29:54","Uptime":"0T00:12:55","UptimeSec":775,"Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"POWER1":"OFF","POWER2":"OFF","POWER3":"OFF","POWER4":"ON","Wifi":{"AP":1,"SSId":"StFld5","BSSId":"48:5D:35:41:11:2E","Channel":7,"Mode":"11n","RSSI":86,"Signal":-57,"LinkCount":1,"Downtime":"0T00:00:07"}}
14:29:54.242 RSL: SENSOR = {"Time":"2024-05-23T14:29:54","ANALOG":{"A0":1024},"ENERGY":{"TotalStartTime":"2024-05-21T10:24:59","Total":0.002,"Yesterday":0.000,"Today":0.001,"Period":0,"Power":19,"ApparentPower":64,"ReactivePower":61,"Factor":0.29,"Voltage":94,"Current":0.682}}
14:29:56.781 RSL: RESULT = {"POWER4":"OFF"}
14:29:56.783 RSL: POWER4 = OFF
14:30:04.200 RSL: STATE = {"Time":"2024-05-23T14:30:04","Uptime":"0T00:13:05","UptimeSec":785,"Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"POWER1":"OFF","POWER2":"OFF","POWER3":"OFF","POWER4":"OFF","Wifi":{"AP":1,"SSId":"StFld5","BSSId":"48:5D:35:41:11:2E","Channel":7,"Mode":"11n","RSSI":72,"Signal":-64,"LinkCount":1,"Downtime":"0T00:00:07"}}
14:30:04.251 RSL: SENSOR = {"Time":"2024-05-23T14:30:04","ANALOG":{"A0":1024},"ENERGY":{"TotalStartTime":"2024-05-21T10:24:59","Total":0.002,"Yesterday":0.000,"Today":0.001,"Period":0,"Power":0,"ApparentPower":0,"ReactivePower":0,"Factor":0.00,"Voltage":0,"Current":0.000}}
14:30:14.200 RSL: STATE = {"Time":"2024-05-23T14:30:14","Uptime":"0T00:13:15","UptimeSec":795,"Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"POWER1":"OFF","POWER2":"OFF","POWER3":"OFF","POWER4":"OFF","Wifi":{"AP":1,"SSId":"StFld5","BSSId":"48:5D:35:41:11:2E","Channel":7,"Mode":"11n","RSSI":70,"Signal":-65,"LinkCount":1,"Downtime":"0T00:00:07"}}
14:30:14.244 RSL: SENSOR = {"Time":"2024-05-23T14:30:14","ANALOG":{"A0":753},"ENERGY":{"TotalStartTime":"2024-05-21T10:24:59","Total":0.002,"Yesterday":0.000,"Today":0.001,"Period":0,"Power":0,"ApparentPower":0,"ReactivePower":0,"Factor":0.00,"Voltage":0,"Current":0.000}}
14:30:24.214 RSL: STATE = {"Time":"2024-05-23T14:30:24","Uptime":"0T00:13:25","UptimeSec":805,"Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"POWER1":"OFF","POWER2":"OFF","POWER3":"OFF","POWER4":"OFF","Wifi":{"AP":1,"SSId":"StFld5","BSSId":"48:5D:35:41:11:2E","Channel":7,"Mode":"11n","RSSI":70,"Signal":-65,"LinkCount":1,"Downtime":"0T00:00:07"}}
14:30:24.261 RSL: SENSOR = {"Time":"2024-05-23T14:30:24","ANALOG":{"A0":748},"ENERGY":{"TotalStartTime":"2024-05-21T10:24:59","Total":0.002,"Yesterday":0.000,"Today":0.001,"Period":0,"Power":0,"ApparentPower":0,"ReactivePower":0,"Factor":0.00,"Voltage":0,"Current":0.000}}
14:30:34.227 RSL: STATE = {"Time":"2024-05-23T14:30:34","Uptime":"0T00:13:35","UptimeSec":815,"Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"POWER1":"OFF","POWER2":"OFF","POWER3":"OFF","POWER4":"OFF","Wifi":{"AP":1,"SSId":"StFld5","BSSId":"48:5D:35:41:11:2E","Channel":7,"Mode":"11n","RSSI":86,"Signal":-57,"LinkCount":1,"Downtime":"0T00:00:07"}}
14:30:34.273 RSL: SENSOR = {"Time":"2024-05-23T14:30:34","ANALOG":{"A0":1024},"ENERGY":{"TotalStartTime":"2024-05-21T10:24:59","Total":0.002,"Yesterday":0.000,"Today":0.001,"Period":0,"Power":0,"ApparentPower":0,"ReactivePower":0,"Factor":0.00,"Voltage":0,"Current":0.000}}
14:30:44.239 RSL: STATE = {"Time":"2024-05-23T14:30:44","Uptime":"0T00:13:45","UptimeSec":825,"Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"POWER1":"OFF","POWER2":"OFF","POWER3":"OFF","POWER4":"OFF","Wifi":{"AP":1,"SSId":"StFld5","BSSId":"48:5D:35:41:11:2E","Channel":7,"Mode":"11n","RSSI":76,"Signal":-62,"LinkCount":1,"Downtime":"0T00:00:07"}}
14:30:44.291 RSL: SENSOR = {"Time":"2024-05-23T14:30:44","ANALOG":{"A0":477},"ENERGY":{"TotalStartTime":"2024-05-21T10:24:59","Total":0.002,"Yesterday":0.000,"Today":0.001,"Period":0,"Power":0,"ApparentPower":0,"ReactivePower":0,"Factor":0.00,"Voltage":0,"Current":0.000}}
14:30:54.198 RSL: STATE = {"Time":"2024-05-23T14:30:54","Uptime":"0T00:13:55","UptimeSec":835,"Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"POWER1":"OFF","POWER2":"OFF","POWER3":"OFF","POWER4":"OFF","Wifi":{"AP":1,"SSId":"StFld5","BSSId":"48:5D:35:41:11:2E","Channel":7,"Mode":"11n","RSSI":76,"Signal":-62,"LinkCount":1,"Downtime":"0T00:00:07"}}
14:30:54.242 RSL: SENSOR = {"Time":"2024-05-23T14:30:54","ANALOG":{"A0":481},"ENERGY":{"TotalStartTime":"2024-05-21T10:24:59","Total":0.002,"Yesterday":0.000,"Today":0.001,"Period":0,"Power":0,"ApparentPower":0,"ReactivePower":0,"Factor":0.00,"Voltage":0,"Current":0.000}}
14:31:04.200 RSL: STATE = {"Time":"2024-05-23T14:31:04","Uptime":"0T00:14:05","UptimeSec":845,"Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"POWER1":"OFF","POWER2":"OFF","POWER3":"OFF","POWER4":"OFF","Wifi":{"AP":1,"SSId":"StFld5","BSSId":"48:5D:35:41:11:2E","Channel":7,"Mode":"11n","RSSI":74,"Signal":-63,"LinkCount":1,"Downtime":"0T00:00:07"}}
14:31:04.244 RSL: SENSOR = {"Time":"2024-05-23T14:31:04","ANALOG":{"A0":1024},"ENERGY":{"TotalStartTime":"2024-05-21T10:24:59","Total":0.002,"Yesterday":0.000,"Today":0.001,"Period":0,"Power":0,"ApparentPower":0,"ReactivePower":0,"Factor":0.00,"Voltage":0,"Current":0.000}}
14:31:14.199 RSL: STATE = {"Time":"2024-05-23T14:31:14","Uptime":"0T00:14:15","UptimeSec":855,"Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"POWER1":"OFF","POWER2":"OFF","POWER3":"OFF","POWER4":"OFF","Wifi":{"AP":1,"SSId":"StFld5","BSSId":"48:5D:35:41:11:2E","Channel":7,"Mode":"11n","RSSI":74,"Signal":-63,"LinkCount":1,"Downtime":"0T00:00:07"}}
14:31:14.242 RSL: SENSOR = {"Time":"2024-05-23T14:31:14","ANALOG":{"A0":230},"ENERGY":{"TotalStartTime":"2024-05-21T10:24:59","Total":0.002,"Yesterday":0.000,"Today":0.001,"Period":0,"Power":0,"ApparentPower":0,"ReactivePower":0,"Factor":0.00,"Voltage":0,"Current":0.000}}
14:31:24.199 RSL: STATE = {"Time":"2024-05-23T14:31:24","Uptime":"0T00:14:25","UptimeSec":865,"Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"POWER1":"OFF","POWER2":"OFF","POWER3":"OFF","POWER4":"OFF","Wifi":{"AP":1,"SSId":"StFld5","BSSId":"48:5D:35:41:11:2E","Channel":7,"Mode":"11n","RSSI":90,"Signal":-55,"LinkCount":1,"Downtime":"0T00:00:07"}}
14:31:24.245 RSL: SENSOR = {"Time":"2024-05-23T14:31:24","ANALOG":{"A0":1024},"ENERGY":{"TotalStartTime":"2024-05-21T10:24:59","Total":0.002,"Yesterday":0.000,"Today":0.001,"Period":0,"Power":0,"ApparentPower":0,"ReactivePower":0,"Factor":0.00,"Voltage":0,"Current":0.000}}
14:31:34.204 RSL: STATE = {"Time":"2024-05-23T14:31:34","Uptime":"0T00:14:35","UptimeSec":875,"Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":22,"MqttCount":0,"POWER1":"OFF","POWER2":"OFF","POWER3":"OFF","POWER4":"OFF","Wifi":{"AP":1,"SSId":"StFld5","BSSId":"48:5D:35:41:11:2E","Channel":7,"Mode":"11n","RSSI":92,"Signal":-54,"LinkCount":1,"Downtime":"0T00:00:07"}}
14:31:34.254 RSL: SENSOR = {"Time":"2024-05-23T14:31:34","ANALOG":{"A0":1024},"ENERGY":{"TotalStartTime":"2024-05-21T10:24:59","Total":0.002,"Yesterday":0.000,"Today":0.001,"Period":0,"Power":0,"ApparentPower":0,"ReactivePower":0,"Factor":0.00,"Voltage":0,"Current":0.000}}
14:31:44.217 RSL: STATE = {"Time":"2024-05-23T14:31:44","Uptime":"0T00:14:45","UptimeSec":885,"Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"POWER1":"OFF","POWER2":"OFF","POWER3":"OFF","POWER4":"OFF","Wifi":{"AP":1,"SSId":"StFld5","BSSId":"48:5D:35:41:11:2E","Channel":7,"Mode":"11n","RSSI":90,"Signal":-55,"LinkCount":1,"Downtime":"0T00:00:07"}}
14:31:44.267 RSL: SENSOR = {"Time":"2024-05-23T14:31:44","ANALOG":{"A0":1024},"ENERGY":{"TotalStartTime":"2024-05-21T10:24:59","Total":0.002,"Yesterday":0.000,"Today":0.001,"Period":0,"Power":0,"ApparentPower":0,"ReactivePower":0,"Factor":0.00,"Voltage":0,"Current":0.000}}
14:31:54.231 RSL: STATE = {"Time":"2024-05-23T14:31:54","Uptime":"0T00:14:55","UptimeSec":895,"Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"POWER1":"OFF","POWER2":"OFF","POWER3":"OFF","POWER4":"OFF","Wifi":{"AP":1,"SSId":"StFld5","BSSId":"48:5D:35:41:11:2E","Channel":7,"Mode":"11n","RSSI":92,"Signal":-54,"LinkCount":1,"Downtime":"0T00:00:07"}}
14:31:54.276 RSL: SENSOR = {"Time":"2024-05-23T14:31:54","ANALOG":{"A0":1024},"ENERGY":{"TotalStartTime":"2024-05-21T10:24:59","Total":0.002,"Yesterday":0.000,"Today":0.001,"Period":0,"Power":0,"ApparentPower":0,"ReactivePower":0,"Factor":0.00,"Voltage":0,"Current":0.000}}
14:32:04.244 RSL: STATE = {"Time":"2024-05-23T14:32:04","Uptime":"0T00:15:05","UptimeSec":905,"Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"POWER1":"OFF","POWER2":"OFF","POWER3":"OFF","POWER4":"OFF","Wifi":{"AP":1,"SSId":"StFld5","BSSId":"48:5D:35:41:11:2E","Channel":7,"Mode":"11n","RSSI":92,"Signal":-54,"LinkCount":1,"Downtime":"0T00:00:07"}}
14:32:04.288 RSL: SENSOR = {"Time":"2024-05-23T14:32:04","ANALOG":{"A0":1024},"ENERGY":{"TotalStartTime":"2024-05-21T10:24:59","Total":0.002,"Yesterday":0.000,"Today":0.001,"Period":0,"Power":0,"ApparentPower":0,"ReactivePower":0,"Factor":0.00,"Voltage":0,"Current":0.000}}
14:32:14.200 RSL: STATE = {"Time":"2024-05-23T14:32:14","Uptime":"0T00:15:15","UptimeSec":915,"Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"POWER1":"OFF","POWER2":"OFF","POWER3":"OFF","POWER4":"OFF","Wifi":{"AP":1,"SSId":"StFld5","BSSId":"48:5D:35:41:11:2E","Channel":7,"Mode":"11n","RSSI":92,"Signal":-54,"LinkCount":1,"Downtime":"0T00:00:07"}}
14:32:14.243 RSL: SENSOR = {"Time":"2024-05-23T14:32:14","ANALOG":{"A0":1024},"ENERGY":{"TotalStartTime":"2024-05-21T10:24:59","Total":0.002,"Yesterday":0.000,"Today":0.001,"Period":0,"Power":0,"ApparentPower":0,"ReactivePower":0,"Factor":0.00,"Voltage":0,"Current":0.000}}
14:32:24.199 RSL: STATE = {"Time":"2024-05-23T14:32:24","Uptime":"0T00:15:25","UptimeSec":925,"Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"POWER1":"OFF","POWER2":"OFF","POWER3":"OFF","POWER4":"OFF","Wifi":{"AP":1,"SSId":"StFld5","BSSId":"48:5D:35:41:11:2E","Channel":7,"Mode":"11n","RSSI":90,"Signal":-55,"LinkCount":1,"Downtime":"0T00:00:07"}}
14:32:24.245 RSL: SENSOR = {"Time":"2024-05-23T14:32:24","ANALOG":{"A0":1024},"ENERGY":{"TotalStartTime":"2024-05-21T10:24:59","Total":0.002,"Yesterday":0.000,"Today":0.001,"Period":0,"Power":0,"ApparentPower":0,"ReactivePower":0,"Factor":0.00,"Voltage":0,"Current":0.000}}
14:32:34.199 RSL: STATE = {"Time":"2024-05-23T14:32:34","Uptime":"0T00:15:35","UptimeSec":935,"Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"POWER1":"OFF","POWER2":"OFF","POWER3":"OFF","POWER4":"OFF","Wifi":{"AP":1,"SSId":"StFld5","BSSId":"48:5D:35:41:11:2E","Channel":7,"Mode":"11n","RSSI":92,"Signal":-54,"LinkCount":1,"Downtime":"0T00:00:07"}}
14:32:34.248 RSL: SENSOR = {"Time":"2024-05-23T14:32:34","ANALOG":{"A0":1024},"ENERGY":{"TotalStartTime":"2024-05-21T10:24:59","Total":0.002,"Yesterday":0.000,"Today":0.001,"Period":0,"Power":0,"ApparentPower":0,"ReactivePower":0,"Factor":0.00,"Voltage":0,"Current":0.000}}
14:32:44.199 RSL: STATE = {"Time":"2024-05-23T14:32:44","Uptime":"0T00:15:45","UptimeSec":945,"Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":27,"MqttCount":0,"POWER1":"OFF","POWER2":"OFF","POWER3":"OFF","POWER4":"OFF","Wifi":{"AP":1,"SSId":"StFld5","BSSId":"48:5D:35:41:11:2E","Channel":7,"Mode":"11n","RSSI":90,"Signal":-55,"LinkCount":1,"Downtime":"0T00:00:07"}}
14:32:44.246 RSL: SENSOR = {"Time":"2024-05-23T14:32:44","ANALOG":{"A0":1024},"ENERGY":{"TotalStartTime":"2024-05-21T10:24:59","Total":0.002,"Yesterday":0.000,"Today":0.001,"Period":0,"Power":0,"ApparentPower":0,"ReactivePower":0,"Factor":0.00,"Voltage":0,"Current":0.000}}
14:32:54.208 RSL: STATE = {"Time":"2024-05-23T14:32:54","Uptime":"0T00:15:55","UptimeSec":955,"Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"POWER1":"OFF","POWER2":"OFF","POWER3":"OFF","POWER4":"OFF","Wifi":{"AP":1,"SSId":"StFld5","BSSId":"48:5D:35:41:11:2E","Channel":7,"Mode":"11n","RSSI":90,"Signal":-55,"LinkCount":1,"Downtime":"0T00:00:07"}}
14:32:54.250 RSL: SENSOR = {"Time":"2024-05-23T14:32:54","ANALOG":{"A0":1024},"ENERGY":{"TotalStartTime":"2024-05-21T10:24:59","Total":0.002,"Yesterday":0.000,"Today":0.001,"Period":0,"Power":0,"ApparentPower":0,"ReactivePower":0,"Factor":0.00,"Voltage":0,"Current":0.000}}
14:33:04.198 RSL: STATE = {"Time":"2024-05-23T14:33:04","Uptime":"0T00:16:05","UptimeSec":965,"Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"POWER1":"OFF","POWER2":"OFF","POWER3":"OFF","POWER4":"OFF","Wifi":{"AP":1,"SSId":"StFld5","BSSId":"48:5D:35:41:11:2E","Channel":7,"Mode":"11n","RSSI":90,"Signal":-55,"LinkCount":1,"Downtime":"0T00:00:07"}}
14:33:04.247 RSL: SENSOR = {"Time":"2024-05-23T14:33:04","ANALOG":{"A0":1024},"ENERGY":{"TotalStartTime":"2024-05-21T10:24:59","Total":0.002,"Yesterday":0.000,"Today":0.001,"Period":0,"Power":0,"ApparentPower":0,"ReactivePower":0,"Factor":0.00,"Voltage":0,"Current":0.000}}```

1 reply

arendst May 23, 2024
Maintainer

As you can see each button responds with a different Analog value (as expected). Either 230, 480 or 750 when pressed, 1024 when released.

These values should be changed by rule response Analog#A0div10 into values like 25, 50, 75.

Pls re-verify the output of command rule0.

MyUniversalDeveloper · 2024-05-24T11:53:56Z

MyUniversalDeveloper
May 24, 2024
Author

Hi,
after a recalibration (rules) all seems to be correct. Why ever there was a change after the firmwareupdate before. Thank you for your patience. Have a nice weekend.

1 reply

sfromis May 24, 2024

IDK what version you upgraded from, but some time ago, Tasmota started to do more oversampling for some types of analog input.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Can't switch power outlets after update to tasmota 13.4.0.4 (and 13.4.1.1) #21382

{{title}}

Replies: 20 comments 6 replies

{{title}}

{{editor}}'s edit

{{editor}}'s edit

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{editor}}'s edit

{{editor}}'s edit

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{editor}}'s edit

{{editor}}'s edit

{{title}}

{{title}}

{{title}}

Select a reply

Can't switch power outlets after update to tasmota 13.4.0.4 (and 13.4.1.1) #21382

PROBLEM DESCRIPTION

REQUESTED INFORMATION

TO REPRODUCE

EXPECTED BEHAVIOUR

SCREENSHOTS

ADDITIONAL CONTEXT

Replies: 20 comments · 6 replies

arendst Apr 15, 2024 Maintainer

arendst Apr 15, 2024 Maintainer

MyUniversalDeveloper Apr 16, 2024 Author

Jason2866 Apr 16, 2024 Collaborator

arendst Apr 17, 2024 Maintainer

arendst Apr 17, 2024 Maintainer

arendst Apr 17, 2024 Maintainer

MyUniversalDeveloper Apr 20, 2024 Author

Jason2866 Apr 20, 2024 Collaborator

Jason2866 Apr 28, 2024 Collaborator

MyUniversalDeveloper May 7, 2024 Author

arendst May 7, 2024 Maintainer

Jason2866 May 7, 2024 Collaborator

Jason2866 May 7, 2024 Collaborator

MyUniversalDeveloper May 21, 2024 Author

MyUniversalDeveloper May 23, 2024 Author

arendst May 23, 2024 Maintainer

MyUniversalDeveloper May 24, 2024 Author

Replies: 20 comments 6 replies

arendst
Apr 15, 2024
Maintainer

arendst
Apr 15, 2024
Maintainer

MyUniversalDeveloper
Apr 16, 2024
Author

Jason2866
Apr 16, 2024
Collaborator

arendst
Apr 17, 2024
Maintainer

arendst
Apr 17, 2024
Maintainer

arendst
Apr 17, 2024
Maintainer

MyUniversalDeveloper
Apr 20, 2024
Author

Jason2866
Apr 20, 2024
Collaborator

Jason2866
Apr 28, 2024
Collaborator

MyUniversalDeveloper
May 7, 2024
Author

arendst
May 7, 2024
Maintainer

Jason2866
May 7, 2024
Collaborator

Jason2866
May 7, 2024
Collaborator

MyUniversalDeveloper
May 21, 2024
Author

MyUniversalDeveloper
May 23, 2024
Author

arendst May 23, 2024
Maintainer

MyUniversalDeveloper
May 24, 2024
Author