Skip to content

A minimal firmware for ota flashing tasmota from mongoose os

License

Notifications You must be signed in to change notification settings

arendst/mgos-to-tasmota

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

72 Commits
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

mg2x

A minimal firmware for OTA (over the air) flashing various target firmwares starting from Mongoose OS.

Original repository at https://github.com/yaourdt/mgos-to-tasmota. This repository is tailored to use Tasmota Latest Release Version only.

Overview

Mg2x is an intermediate firmware that can be used to install Tasmota on various Shelly models. It will install the latest released version, and you can continue from there to your favourite target release.

Install

Warning: This application should generally be safe to use for all supported devices. Still, overwriting a device's boot loader via OTA update is a risky operation. If something unexpected fails, your device may be bricked, unless you know how to flash a new firmware over a wired connection.

Warning: You can go back to Mongoose OS via OTA as well, using this firmware, but be aware the application is still at an early stage. If something fails, your device may be bricked, if you don't know how to flash a new firmware over a wired connection.

Before flashing this firmware, connect your device to a WIFI network with internet access. From your browser, open the update URL for your device from the table below. Replace shellyip with the IP address of your Shelly. The device will restart one or two times and attempt to download Tasmota. If this download succeeds, the device will restart again, and you will see a new WIFI network labeled tasmota-????. This process should take no longer than 4 - 5 minutes, depending on your network connection.

There is a video tutorial on how to flash this firmware. Thank you, digiblur!

If the download fails, or your internet connection is disrupted, simply turn the device off and on again, the intermediate firmware will retry until it succeeds.

In the unlikely event that the WIFI credentials are wrong, the device will try to connect to a backup WIFI with SSID mgos-recover and password RJoPuKC3u5, which you can use for recovery.

Device Update URL Tasmota Template
Shelly 1 http://shellyip/ota?url=http://ota.tasmota.com/tasmota/shelly/mg2tasmota-Shelly1.zip {"NAME":"Shelly 1","GPIO":[1,1,0,1,224,192,0,0,0,0,0,0,0,0],"FLAG":0,"BASE":46}
Shelly 1PM http://shellyip/ota?url=http://ota.tasmota.com/tasmota/shelly/mg2tasmota-Shelly1PM.zip {"NAME":"Shelly 1PM","GPIO":[320,0,0,0,192,2720,0,0,0,0,0,224,0,4736],"FLAG":0,"BASE":18}
Shelly 1L http://shellyip/ota?url=http://ota.tasmota.com/tasmota/shelly/mg2tasmota-Shelly1L.zip {"NAME":"Shelly 1L","GPIO":[320,0,0,0,192,224,0,0,0,0,193,0,0,4736],"FLAG":0,"BASE":18}
Shelly Plug S http://shellyip/ota?url=http://ota.tasmota.com/tasmota/shelly/mg2tasmota-ShellyPlugS.zip {"NAME":"Shelly Plug S","GPIO":[320,1,576,1,1,2720,0,0,2624,32,2656,224,1,4736],"FLAG":0,"BASE":45}
Shelly 2 http://shellyip/ota?url=http://ota.tasmota.com/tasmota/shelly/mg2tasmota-Shelly2.zip {"NAME":"Shelly 2","GPIO":[0,2752,0,2784,224,225,0,0,160,0,161,2816,0,0],"FLAG":0,"BASE":47}
Shelly 2.5 http://shellyip/ota?url=http://ota.tasmota.com/tasmota/shelly/mg2tasmota-Shelly25.zip {"NAME":"Shelly 2.5","GPIO":[320,0,0,0,224,193,0,0,640,192,608,225,3456,4736],"FLAG":0,"BASE":18}
Shelly RGBW2 http://shellyip/ota?url=http://ota.tasmota.com/tasmota/shelly/mg2tasmota-ShellyRGBW2.zip {"NAME":"Shelly RGBW2","GPIO":[0,0,288,0,419,1,0,0,416,32,418,417,0,0],"FLAG":0,"BASE":18}
Shelly Dimmer 1 http://shellyip/ota?url=http://ota.tasmota.com/tasmota/shelly/mg2tasmota-ShellyDimmer1.zip {"NAME":"Shelly Dimmer 1","GPIO":[0,3200,0,3232,5568,5600,0,0,192,0,193,288,0,4736],"FLAG":0,"BASE":18}
Shelly Dimmer 2 http://shellyip/ota?url=http://ota.tasmota.com/tasmota/shelly/mg2tasmota-ShellyDimmer2.zip {"NAME":"Shelly Dimmer 2","GPIO":[0,3200,0,3232,5568,5600,0,0,193,0,192,0,320,4736],"FLAG":0,"BASE":18}
Shelly EM http://shellyip/ota?url=http://ota.tasmota.com/tasmota/shelly/mg2tasmota-ShellyEM.zip {"NAME":"Shelly EM","GPIO":[0,0,0,0,0,0,0,0,640,3457,608,224,8832,1],"FLAG":0,"BASE":18}
Shelly Bulb http://shellyip/ota?url=http://ota.tasmota.com/tasmota/shelly/mg2tasmota-ShellyBulb.zip not yet available, only flash if you a perfectly certain about what you are doing
Shelly Vintage http://shellyip/ota?url=http://ota.tasmota.com/tasmota/shelly/mg2tasmota-ShellyVintage.zip {"NAME":"Shelly Vintage","GPIO":[0,0,0,0,416,0,0,0,0,0,0,0,0,0],"FLAG":0,"BASE":18}
Shelly Plug US http://shellyip/ota?url=http://ota.tasmota.com/tasmota/shelly/mg2tasmota-ShellyPlugUS.zip {"NAME":"Shelly Plug US","GPIO":[288,0,321,0,224,2720,0,0,2624,32,2656,544,0,0],"FLAG":0,"BASE":45}
Shelly Duo http://shellyip/ota?url=http://ota.tasmota.com/tasmota/shelly/mg2tasmota-ShellyBulbDuo.zip {"NAME":"Shelly Duo","GPIO":[0,0,0,0,417,416,0,0,0,0,0,0,0],"FLAG":0,"BASE":18}
Shelly H&T http://shellyip/ota?url=http://ota.tasmota.com/tasmota/shelly/mg2tasmota-ShellyHT.zip not yet available, only flash if you a perfectly certain about what you are doing
Shelly i3 http://shellyip/ota?url=http://ota.tasmota.com/tasmota/shelly/mg2tasmota-ShellyI3.zip {"NAME":"Shelly i3","GPIO":[0,0,0,0,0,320,0,0,193,194,192,0,0,4736],"FLAG":0,"BASE":18}
Shelly Plug 2 http://shellyip/ota?url=http://ota.tasmota.com/tasmota/shelly/mg2tasmota-ShellyPlug2.zip not yet available, only flash if you a perfectly certain about what you are doing
Shelly Uni http://shellyip/ota?url=http://ota.tasmota.com/tasmota/shelly/mg2tasmota-ShellyUni.zip {"NAME":"Shelly Uni","GPIO":[320,0,0,0,225,1216,0,0,192,193,194,224,0,4864],"FLAG":0,"BASE":18}
Shelly Duo RGBW http://shellyip/ota?url=http://ota.tasmota.com/tasmota/shelly/mg2tasmota-ShellyDuoRGBW.zip {"NAME":"Shelly Duo RGBW","GPIO":[0,0,0,0,0,419,0,0,417,416,418,0,0,0],"FLAG":0,"BASE":18}

For your convenience, the table above also lists the matching Tasmota device templates from templates.blakadder.com which you can use to configure Tasmota after installation.

Build the firmware yourself

You can compile a binary version of this firmware using mos tools. Once installed, clone this repository and run mos build --build-var MODEL=Shelly1 --build-var TARGETFW=tasmota --platform esp8266 to create a binary for e.g. a Shelly1 switch located in build/fw.zip.

Acknowledgments

Thanks to rojer for helping me with the debugging of the initial code.

This firmware is build using a fork of Mongoose OS docker action which can be found here.

About

A minimal firmware for ota flashing tasmota from mongoose os

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • C 100.0%