Skip to content
This repository has been archived by the owner on Jun 2, 2024. It is now read-only.
/ docker-hadoop Public archive

A Docker container with a full Hadoop cluster setup with Spark and Zeppelin

Notifications You must be signed in to change notification settings

Segence/docker-hadoop

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

31 Commits
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Segence Hadoop Docker container

Overview

This Docker container contains a full Hadoop distribution with the following components:

  • Hadoop 2.9.2 (including YARN)
  • Oracle JDK 8
  • Scala 2.11.11
  • Spark 2.4.4
  • Zeppelin 0.8.2

Setting up a new Hadoop cluster

For all below steps, the Docker image segence/hadoop:latest has to be built or pulled from DockerHub.

  • Build the current image locally: ./build-docker-image.sh
  • Pull from DockerHub: docker pull segence/hadoop:latest

The default SSH port of the Docker containers is 2222. This is, so in a standalone cluster setup, each namenode and datanode can be ran on separate physical server (or virtual appliances). The servers can still use the default SSH port 22 but the datanodes, running inside Docker containers, will be using port 2222. This port is automatically exposed. It's important to note that all exposed ports have to be open on the firewall of the physical servers, so other nodes in the cluster can access them.

Hadoop host names have to follow the hadoop-* format. Automatic acceptance of SSH host key fingerprints is enabled for any hosts with the domain name hadoop-*. This is so Hadoop nodes on the cluster can establish SSH connections between each other without manually accepting host keys. This means that the Docker hosts, which run the Hadoop namenode and datanode containers have to be mapped to DNS names. One can use for example Microsoft Windows Server to set up a DNS server.

Setting up a local Hadoop cluster

This will set up a local Hadoop cluster using bridged networking with one namenode and one datanode.

  1. Go into the cluster-setup/local-cluster directory: cd cluster-setup/local-cluster
  2. Edit the slaves-config/slaves file if you want to add more slaves (datanodes) other than the default one slave node. If you add more slaves then also edit the docker-compose.yml file by adding more slave node configurations.
  3. Launch the new cluster: docker-compose up -d

You can log into the namenode (master) by issuing docker exec -it hadoop-namenode bash and to the datanode (slave) by docker exec -it hadoop-datanode1 bash.

By default, the HDFS replication factor is set to 1, because it is assumed that a local Docker cluster will be started with a single datanode. To override the replication setting simply change the HDFS_REPLICATION_FACTOR environment variable in the docker-compose.yml file (and also add more datanodes). Adding more data nodes adds the complexity of exposing all datanode UI ports to localhost. In this scenario, no UI ports should be exposed to avoid the conflict.

Setting up a standalone Hadoop cluster

Preparation

Create the hadoop user on the host system, e.g. useradd hadoop

RHEL/CentOS note

If you encounter the following error message when running a Docker container: WARNING: IPv4 forwarding is disabled. Networking will not work. then turn on packet forwading (RHEL 7): /sbin/sysctl -w net.ipv4.ip_forward=1

More info

You can use the script cluster-setup/standalone-cluster/setup-rhel.sh to achieve the above, as well as to create the required directories and change their ownership (as in point 1 and 2 below, so you can skip them if you used the RHEL setup script).

The cluster setup runs with host networking, so the Hadoop nodes will get the hostname and DNS settings directly from the host machine. Make sure IP addresses and DNS names, as well as DNS resolution is correctly set up on the host machines.

Namenode setup

  1. Create the following directories on the host:
  • Directory for the HDFS data: /hadoop/data
  • Directory for MapReduce/Spark deployments: /hadoop/deployments
  1. Make the hadoop user own the directories: chown -R hadoop:hadoop /hadoop
  2. Create the file /hadoop/slaves-config/slaves listing all slave node host names on a separate line
  3. Copy the start-namenode.sh file onto the system (e.g. into /hadoop/start-namenode.sh)
  4. Launch the new namenode: /hadoop/start-namenode.sh [HDFS REPLICATION FACTOR], where HDFS REPLICATION FACTOR is the replication factor for HDFS blocks (defaults to 2).

Datanode setup

  1. Create the directory for the HDFS data: /hadoop/data
  2. Make the hadoop user own the directories: chown -R hadoop:hadoop /hadoop
  3. Create the file /hadoop/slaves-config/slaves listing all slave node host names on a separate line
  4. Copy the start-datanode.sh file onto the system (e.g. into /hadoop/start-datanode.sh)
  5. Launch the new datanode with its ID: /hadoop/start-datanode.sh <NAMENODE HOST NAME> [HDFS REPLICATION FACTOR], where NAMENODE HOST NAME is the host name of the namenode and HDFS REPLICATION FACTOR is the replication factor for HDFS blocks (defaults to 2, and has to be consistent throughout all cluster nodes).

Starting the cluster

Once either a local or standalone cluster is provisioned, follow the below steps:

  1. Log in to the namenode, e.g. docker exec -it hadoop-namenode bash
  2. Become the hadoop user: su hadoop
  3. Format the HDFS namenode: ~/utils/format-namenode.sh

HDFS has to be restarted the first time before MapReduce jobs can be successfully ran. This is because HDFS creates some data on the first run but stopping it can clean up its state so MapReduce jobs can be ran through YARN afterwards.

Execute the following commands as root:

  1. Start Hadoop: service hadoop start
  2. Stop Hadoop: service hadoop stop
  3. Start Hadoop again: service hadoop start

Restarting HDFS has to be done after formatting the namenode, otherwise running the first MapReduce job will always fail and the cluster will terminate.

Verify that the datanodes are correctly registered, issue on namenode: hdfs dfsadmin -report

Interacting with HDFS

Local access

When you're logged into the namenode, simply use the hadoop dfs ... command to interact with the HDFS cluster. E.g. listing the contents of the root of the file system: hdfs dfs -ls /

Remote access

  1. Make sure you've got the same version of Hadoop downloaded and extracted on your local system
  2. Go into your Hadoop installation directory, and then into the bin directory.
  3. For example to list the contents of your HDFS cluster, use: ./hdfs dfs -ls hdfs://localhost:8020/

Web interfaces

List of web interfaces

Web UIs URL
Hadoop Name Node http://localhost:50070
Hadoop Data Node http://localhost:50075
WebHDFS REST API http://localhost:50070/webhdfs/v1
NodeManager UI on Data Node http://localhost:8042
YARN Resource Manager http://localhost:8088
Spark UI http://localhost:4040
Zeppelin UI http://localhost:9001

Change localhost to the IP address or host name of the namenode.

WebHDFS REST API

Running sample jobs using YARN

Running the word count example

The script will create a directory called input with some sample files. It'll upload them into the HDFS cluster and run a simple MapReduce job. It'll print the results to the console.

  1. Log in to the namenode, e.g. docker exec -it hadoop-namenode bash
  2. Become the hadoop user: su hadoop
  3. Go into the home directory of the hadoop user: cd
  4. Run ~/utils/run-wordcount.sh

Running a sample interactive Spark job

Running the word count example leaves some files in HDFS. The below example Spark job reads those files and simply splits the file contents by whitespaces. It then prints out the results.

Once you're on the namenode, issue spark-shell:

val input = sc.textFile("/user/hadoop/input")
val splitContent = input.map(r => r.split(" "))
splitContent.foreach(line => println(line.toSeq))

To run it against the YARN cluster, launch with spark-shell --master=yarn. In this way, println does not execute in the driver since you are executing it on elements of the RDD. It executes in an executor, which can happen to execute in-process in local mode. In general you should not expect this to print results in the driver.

Running a notebook in Zeppelin

Zeppelin has to be ran as the hadoop user, so make sure to start the service as the hadoop user. It won't run properly with all interpreters under a different user!

  1. Log in to the namenode, e.g. docker exec -it hadoop-namenode bash
  2. Become the hadoop user: su hadoop
  3. Go into the home directory of the hadoop user: cd
  4. Start Zeppelin: zeppelin-daemon.sh start
  5. Open the Zeppelin UI in your browser
  6. On the home page, click on 'Create new note'
  7. The below snippet is written in R. It loads the directory content of the input files used in the sample MapReduce job:
%r
df <- read.df(sqlContext, "/user/hadoop/input/", source = "text")
head(df)