Skip to content

[ICCV'19] Calibration Wizard: A Guidance System for Camera Calibration Based on Modelling Geometric and Corner Uncertainty

License

Notifications You must be signed in to change notification settings

pengsongyou/CalibrationWizard

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

6 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Calibration Wizard

Paper | Video

This repository contains the implementation of the paper:

Calibration Wizard: A Guidance System for Camera Calibration Based on Modelling Geometric and Corner Uncertainty
Songyou Peng and Peter Sturm
ICCV 2019 (Oral)

If you find our code or paper useful, please consider citing

@inproceedings{peng2019iccv,
 author =  {Songyou Peng and Peter Sturm},
 title = {Calibration Wizard: A Guidance System for Camera Calibration Based on Modelling Geometric and Corner Uncertainty},
 booktitle = {IEEE International Conference on Computer Vision (ICCV)},
 year = {2019},
}

Installation

Requirements

  • CMake
  • OpenCV
  • MATLAB

Build

git clone https://github.com/pengsongyou/CalibrationWizard
cd CalibrationWizard
mkdir build
cd build
cmake ..
make

Tested working on Mac OSX, OpenCV 2.4.11 and MATLAB R2015b.

Usage

  • First step: run binary ./bin/CalibrationWizard and choose mode=0 to capture images freely for initial calibration. Press space to capture one image. After capturing, press ESC and the calibration is automatically done.
  • Second step: run src_matlab/main_estimate.m to estimate the next best pose.
  • Third step: run binary ./bin/CalibrationWizard again and choose mode=1. The estimated next pose should be displayed. You can try to overlay the checkerboard with the new pose, and press space to capture the image.

Loop over the second and third step until you are satisfied, or tired :)

Command Line Options

  • mode=0 captures images for initial camera calibration
  • mode=1 shows the next best pose for capturing

In addition, we provide mode=2 if you only want to perform calibration on all the captured images listed in out/images/image_list.xml.

TODO

  • Release codes of the unified system in C++ which integrates the next best pose estimation.

Extreme Poses

Sometimes the next pose is extreme so the checkerboard cannot be detected. Please consider:

  • Check if the values in the uncertainty map are low. If yes, then the calibration has more or less converged.
  • Consider autocorrelation matrix, simply set autoCorr_flag=1 in src_matlab/main_estimate.m.
  • Re-run src_matlab/main_estimate.m.

About

[ICCV'19] Calibration Wizard: A Guidance System for Camera Calibration Based on Modelling Geometric and Corner Uncertainty

Topics

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published