Skip to content

xolox/python-crypto-drive-manager

Repository files navigation

crypto-drive-manager: Unlock all your encrypted drives with one pass phrase

The crypto-drive-manager program allows you to safely, quickly and conveniently unlock an unlimited number of LUKS encrypted devices using a single pass phrase. You can think of it as a key pass for LUKS encrypted devices. It works by creating a small (10 MB) encrypted file system inside a regular file (using a loop device) and storing key files for the encrypted devices of your choosing inside this encrypted file system. Each time you run the program it temporarily unlocks the 10 MB encrypted file system and uses the key files to unlock and mount encrypted devices that are present and not already unlocked.

Installation

The crypto-drive-manager program is written in Python and is available on PyPI which means installation should be as simple as:

$ pip install crypto-drive-manager

There's actually a multitude of ways to install Python packages (e.g. the per user site-packages directory, virtual environments or just installing system wide) and I have no intention of getting into that discussion here, so if this intimidates you then read up on your options before returning to these instructions ;-).

Configuration

The crypto-drive-manager program doesn't have a configuration file because it looks at your system configuration to infer what it should do. You need to create or change /etc/crypttab in order to enable crypto-drive-manager. As an example here's my /etc/crypttab file:

# <target name>  <source device>                            <key file>                 <options>
internal-hdd     UUID=626f4560-cf80-4ed9-b211-ac263b41ca67  none                       luks
media-files      UUID=6d413429-f8d1-4d8e-8a3a-075603b8efdd  /mnt/keys/media-files.key  luks,noauto
mirror3          UUID=978d7a3a-c902-43e6-aa71-5654d406c247  /mnt/keys/mirror3.key      luks,noauto
mirror4          UUID=7a48e547-1dfa-4c6a-96e9-05842c87465d  /mnt/keys/mirror4.key      luks,noauto
mirror5          UUID=ac6aa22a-0c32-4bd9-829a-75316177affb  /mnt/keys/mirror5.key      luks,noauto
mirror6          UUID=00474636-6d6e-4ecc-a7d6-21b42d850ac6  /mnt/keys/mirror6.key      luks,noauto
mirror7          UUID=ec56dc10-1086-4f2b-808c-88995cb8b513  /mnt/keys/mirror7.key      luks,noauto

You can see why I don't want to manage all of these encrypted devices manually by entering pass phrases for each of them :-). Even though my root device (internal-hdd) is also encrypted, storing key files to unlock my encrypted devices on my root device doesn't feel right because the key files will be exposed at all times.

You tell crypto-drive-manager to manage an encrypted device by setting the key file (the third field in /etc/crypttab) to a file located under the mount point used by crypto-drive-manager ( /mnt/keys by default). Every time you run crypto-drive-manager it parses /etc/crypttab to find and unlock managed devices. The UUID=... definition in /etc/crypttab is used to check if the physical device exists in /dev/disk/by-uuid. Because of this a source device definition with a UUID=... value is required.

Each physical device that exists is initialized, unlocked and mounted. Device initialization happens when the key file for the encrypted device doesn't exist yet: The key file is created with 4 KB of random bytes and installed as a key on the encrypted device.

The end result is a program that requires a single pass phrase to unlock a virtual keys device containing key files used to unlock a group of encrypted devices. Once the encrypted devices have been unlocked the virtual keys device is unmounted and the keys are no longer available (except in memory, which cannot be avoided to the best of my knowledge).

Usage

Usage: crypto-drive-manager [OPTIONS] [NAME, ..]

Safely, quickly and conveniently unlock an unlimited number of LUKS encrypted devices using a single pass phrase.

By default all entries in /etc/crypttab that reference a key file located under the mount point of the encrypted disk with key files are unlocked (as needed). To unlock a subset of the configured devices you can pass one or more NAME arguments that match mapper name(s) configured in /etc/crypttab.

Supported options:

Option Description
-i, --image-file=PATH Set the pathname of the file that contains the encrypted disk image with key files (defaults to '/root/encryption-keys.img').
-n, --mapper-name=NAME Set the mapper device name for the encrypted disk with key files so that the device for the drive with key files will be created as '/dev/mapper/NAME' (defaults to 'encryption-keys').
-m, --mount-point=PATH Set the pathname of the mount point for the encrypted disk with key files (defaults to '/mnt/keys').
--install-systemd-workaround

Replace the systemd-cryptsetup-generator program with a wrapper that removes the 'RequiresMountsFor' option from the generated configuration files at /var/run/systemd/generator/*.service.

Refer to the readme for more details about how this works.

-v, --verbose Increase logging verbosity (can be repeated).
-q, --quiet Decrease logging verbosity (can be repeated).
-h, --help Show this message and exit.

Problems

When I upgraded my personal server to Ubuntu 16.04 and rebooted the system I was immediately bitten by systemd issue #3816: When any of the encrypted drives managed by crypto-drive-manager are affected by this issue then unmounting of the keys device will cause systemd to immediately unmount and lock those encrypted drives.

My initial workaround for this issue (released in crypto-drive-manager 2.0) was to simply leave the virtual keys device unlocked and mounted, but of course this went straight against how crypto-drive-manager was originally designed and intended to work.

In crypto-drive-manager 3.0 I implemented and released a real workaround:

  1. The command crypto-drive-manager --install-systemd-workaround replaces /lib/systemd/system-generators/systemd-cryptsetup-generator with a symbolic link to the crypto-drive-manager program. The original generator program is renamed so that it remains accessible.
  2. When systemctl daemon-reload is run it calls crypto-drive-manager by following the symbolic link (without realizing it of course).
  3. By checking the value of sys.argv[0] the crypto-drive-manager program can determine whether it's being run by systemd.
  4. In this case crypto-drive-manager will first run the original generator program and then it will rewrite the generated service files located in /var/run/systemd/generator to remove RequiresMountsFor fields.
  5. By the time systemd rereads its configuration files the RequiresMountsFor fields have already been removed.
  6. Because crypto-drive-manager automatically detects the presence or absence of problematic RequiresMountsFor fields it will detect its own workaround and properly lock the virtual keys device after use.
  7. Profit! :-P

To be honest all of this started as a thought experiment with me trying to verify my understanding of the problem and what would be involved to fix it. Once I realized that my (nasty! I know) workaround was actually effective I decided I might as well publish it. I do actually use this workaround on my personal server (for whatever that's worth).

Contact

The latest version of crypto-drive-manager is available on PyPI and GitHub. For bug reports please create an issue on GitHub. If you have questions, suggestions, etc. feel free to send me an e-mail at peter@peterodding.com.

License

This software is licensed under the MIT license.

© 2017 Peter Odding.